Find your error with Ctrl+F — below it is written exactly as the loader prints it.
Before looking for your code, do the three things that close about half of all cases: restart the computer, turn Windows protection off and remove third-party anticheats. Turning an antivirus off is not enough, it has to be removed — after "pause protection for 10 minutes" its services stay in the system and keep intercepting the driver. FaceIt and Riot Vanguard load together with Windows and break the launch even in a different game; Revo Uninstaller removes them along with the registry leftovers that bring the error back after a reinstall.
Failed to load a driver#
Remove FaceIt, Riot Vanguard and anything similar, clear the Temp folder, restart.
Injection error#
The same, plus remove the antivirus. Still failing: turn on a VPN with a country close to Russia, inject with it running and keep it on until the menu opens in the game. On Windows 10 22H2 with the latest updates, rolling the last update back is sometimes the only fix.
Initialization error#
Protection is already off and the error persists: download the loader again and move the file to drive C.
Failed to init krnl ctx#
The launch is blocked by Kaspersky, Avast, AVG, or by FaceIt and Vanguard. Remove them with Revo Uninstaller.
Unknown error (in the loader)#
First remove the antivirus and the anticheats and restart; if Defender will not turn off the normal way, Defender Control does it. When that changes nothing, check the system files with the commands from "Services and system files".
failed to clear trace (1) / Already initiated, please restart PC and try again#
Restart, Windows protection off, antivirus removed.
0x00006/7. Error getting specific data#
The same, followed by a freshly downloaded loader file.
Load drive error please contact to support#
Turn protection off and remove the anticheats. On Windows 11 also open regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CI\Config and set VulnerableDriverBlocklistEnable to 0, then restart.
Failed to create thread (1)#
Turn Defender off, remove the antivirus and the anticheats, clear Temp, restart.
Failed to get system data (system data unavailable)#
Restart the computer and the router, turn protection off. If a third-party HWID spoofer is installed, run the cheat first and the spoofer after it — the loader is incompatible with some of them, and running them together is best avoided.
Too many requests#
On the download page — restart the router and download the file again.
Unknown error#
On the download page — restart the router, turn Windows protection off, remove third-party antivirus software. If it persists, download through a VPN.
The loader is running as administrator and nothing happens#
Three different causes hide behind this, and they are worth checking in order. Switch your DNS to Cloudflare — 1.1.1.1 and 1.0.0.1 — and restart the router. Install WebView2: the loader window is drawn on it, and without it there is nothing to start. If WebView2 is already installed, remove it through "Installed apps" and install it again. The last resort is to start the loader under a VPN.
The required WebView2 Runtime could not be found / Fatal error#
The same missing WebView2; restart after installing it.
The Run button does not respond#
Press Tab until the focus lands on the button, then press Enter. A second monitor occasionally gets in the way: disconnect it for the launch.
0x00005. Error initialization / 0x00008. Error getting driver data#
Restart, then start the loader through "Run as administrator" in the file's context menu, not by double-clicking it.
failed to get class 0 -> 7b1338a87e7461f9#
A restart is enough.
Failed to connect to the server#
Two things break the connection: system time that has drifted, and blocking on the provider's side. Sync the clock like this: "Settings" → "Time & language" → "Date & time", switch automatic time and automatic time zone off and on again — even if they are already on — then press "Sync now" and restart the router. If that does not help, use a VPN with a CIS country, and do not turn it off after the launch or during the game.
Windows Command Processor / no ready signal received#
The same sync. After it, press the menu key in the game right away instead of waiting.
Endless loading, the loader says the key is not activated#
Sync the clock, restart the router, then check "Programs and Features" for anticheats and antivirus software.
Failed to read connection#
Your provider has blocked the server IP. With a dynamic address a router restart is enough; with a static one you need a VPN.
Connection was unexpectedly closed while receiving data#
A VPN with Russia or a CIS country, with both the injection and the game running under it.
Failed to load the module (1)#
A VPN or a proxy is only needed while the loader starts, after that it can go off.
Failed to download the module#
Restart the computer and the router.
Coonnection receive error#
The loader never reached the server, and this one is only solved on our side. Write to support.
Key not found#
The input field must contain no spaces and no extra characters. Copy the key from your order again and paste it with the right mouse button.
A key for another cheat or a renewal is added in the loader itself: the "Add key" button on the left, paste the key, confirm. The current subscription is not reset by that.
LoadLibraru error / Failed to get imports / Failed to load the library (3)#
The Microsoft Visual C++ libraries are missing. Install them and restart.
Entry point not found D3DX#
Install DirectX.
Failed to create the data directory#
Update Windows and reinstall Microsoft Edge WebView2: remove it through "Installed apps" first, then install it again.
the system is under HVCI / Failed find register key (12)#
Turn core isolation off: "Windows Security" → "Device security" → "Core isolation details" → set "Memory integrity" to Off, then restart.
Secure Boot is not supported, please disable it in the BIOS#
Secure Boot is switched off in the BIOS or UEFI; it cannot be done from Windows.
Hyper-V required, please enable it in the Windows#
A command prompt as administrator, two commands in a row:
DISM /Online /Enable-Feature /All /FeatureName:Microsoft-Hyper-V
bcdedit /set hypervisorlaunchtype auto
Restart and try again. If the error stays, enable virtualization in the BIOS — without it the commands do nothing.
Hyper-V when the loader starts#
The developer has a ready-made bat file for this case: run it, wait for it to finish, restart.
System integrity violation (1) / (2)#
In a command prompt as administrator:
bcdedit /set testsigning off
Then restart.
Failed to open the file (1)#
Restore the boot record with a single line:
mountvol X: /s && copy C:\Windows\Boot\EFI\bootmgfw.efi X:\EFI\Microsoft\Boot\bootmgfw.efi && mountvol X: /d
Failed to open the file#
The boot partition itself is damaged and has to be restored as a whole.
Blue screen with CLOCK_WATCHDOG_TIMEOUT#
Two commands in a console as administrator:
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverride /t REG_DWORD /d 3 /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverrideMask /t REG_DWORD /d 3 /f
Failed to reboot the system#
The loader could not restart the machine itself. Restart it manually, run the launch again and answer "Yes" when the reboot is requested.
The loader keeps asking for a reboot after the injection#
Run the developer's file, wait for it to finish initializing, restart.
System initialization error / Failed to get system data#
The WMI service is not running. A command prompt as administrator:
net start winmgmt
If the error stays, enable the service by hand through "Computer Management" → "Services".
Failed to connect to WMI server#
The same place, but the WMI repository is damaged and is restored separately.
Damaged system files#
The check that both "Unknown error" and part of the failed injections come down to:
sfc /scannow
dism /Online /Cleanup-Image /RestoreHealth
Unhandled exception#
Restart, run the loader as administrator, then run sfc /scannow. If it finds damage, the system has to be reinstalled. If it finds none, remove the latest security updates and test the RAM for errors.
Failed to register service / failed to load driver ( C000263, 0 )#
Your Windows build is not supported by the cheat. Update to a current version or reinstall the system from scratch.
Failed to map data 1#
The opposite case: rolling back the last Windows update is what helps.
Failed to query registry value (1)#
The loader cannot read the system version from the registry. Write it in by hand, replacing 2004 with your own build number:
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v DisplayVersion /t REG_SZ /d 2004 /f
The menu does not open#
Check four things: the screen mode your product supports — it is named in the launch guide; Windows protection actually off; the clock synced; a freshly downloaded loader.
anticheat ruuning#
The loader is started before the game, not on top of a running one. Close the game and start over.
Failed to get ready Signal and Failed Signal#
Restart, inject again and launch the game the moment the loader closes, without pauses.
The ESP box is offset from the target#
Set the display scale to 100% in the display settings.
The ESP switches off after a while#
Turn the paging file off and restart.
The ESP stutters and lags behind the character#
Turn "Game Mode" and "Hardware-accelerated GPU scheduling" off in the Windows settings.
Error 0x00009. Error post-initialization process / Error 0x0000A. Pattern not found#
These two are only fixed on the developer's side. Write to support and attach your ntoskrnl.exe from C:\Windows\System32.
Rust Lite, FAILED :: mapper init() and Failed to map driver. NTSTATUS: 0x00000000#
Run the developer's file as administrator, accept the registry change, restart.
Rust Lite, FAILED:: loaded wdfiltrt.sys#
Defender is not fully off; Defender Control finishes the job.
Rust Lite, blue screen during injection#
Delete the .pdb files from C:\Windows\System32 and restart.
Rust Lite, 0xc0000001#
Inject under a VPN; if that fails, the same .pdb files from System32 plus a Temp cleanup.
Rust Lite, mapper init error on Windows 11 / Failed to load vulnerable driver (iqvw64e)#
Turn core isolation off, and for the second one remove the anticheats as well.
Rust Lite, Failed To load driver#
Remove MSI Afterburner, clear Temp, restart.
Rust Lite, NTloadDriver#
The Windows version does not meet the requirements.
Rust Lite, freezes and frame drops in the game#
Set "GC Buffer (MB)" to 2048 in the game settings.
Warface, crash or freeze in PVE#
Turn show grenades and show claymores off in the cheat menu.
Delta Force: Hawk Ops FULL, Unhandled exception (0x00000000C0000005)#
Disable virtualization in the BIOS.
Arma 3, no menu after pressing HOME#
Run the 64-bit build of the game, the 32-bit one is not supported.
Enlisted, Failed to map driver#
Inject under a VPN and turn the VPN off once the injection succeeds.
Nothing helped#
Write to support and describe what is on the screen: the error text, the step it appears on, and what you have already tried. For 0x00009 and 0x0000A, attach ntoskrnl.exe right away.
Two habits remove part of the tickets in advance. Restart the computer after every session with a cheat — shutting it down and turning it back on does not count as a restart. And do not collect reports in the game: the developer warns separately that complaints from other players are a common reason for bans.